EUCLEIA TabScan Diagnostic System: Tabscan S7W

Showing posts with label Tabscan S7W. Show all posts

2018/08/16

How to use Eucleia TabScan wiScan T6 J2534

Eucleia wiScan T6 is a car diagnostic tool which supports J2534 standard interface and major original manufacturer diagnosis software and function.

Function:

1. J2534 Compatible: Honda HDS, Toyota Techstream, VW ODIS, Volvo VIDA,Jaguar Land rover SDD, Ford/Mazda IDS, GM GDS2

2. Can be used as wireless VCI adapter to connect Tabscan S8/S7W tablet scanner via WiFi to carry out more vehicle diagnostic, coding and programming.

Operating system:
Windows Xp, Windows 7, Windows 8, Windows 10 and follow-up version of the 32 bit or 64 bit operating system.

How to use, connect and update wiScan T6 J2534 VCI?

Step 1: Download driver

1.You need a T6 VCI, OBDII cable, interface cable and a laptop.

2.Visit official website www.eucleia.net, select wiScan T6

Download the wiScan T6 driver

3. Connect T6 with laptop via interface cable

Step 2: Update firmware

Run T6 firmware upgrade

Step 3: Run diagnostic

Connect wiScan T6 with vehicle via OBDII cable

http://www.obdii365.com

Eucleia TabScan Reset EPB on VOLVO XC60 2011

Vehicle Information: VOLVO XC60 year 2011

Example: EPB Reset after replacing rear brake block

Step 1: Turn on the ignition switch, select P gear, press the EPB switch to release the handbrake.

Select P gear and release the handbrake

Step 2: Connect EUCLEIA Tabscan S7W/Tabscan S8 diagnostic scanner with vehicle

Select Service function

Step 3: Choose “EPB Reset”

Step 4: Choose “VOLVO”

Step 5: Choose“XC60”

Step 6: Choose “Replace the rear brake pads”

Step 7: Turn ignition on and engine off, click OK

Step 8: at this point, the brake pump will be retracted, and then the ring of rear wheel brake pump will be heard for a few seconds, waiting for the page to jump before replacing the new brake pad to the car.

Step 9. After the replacement is completed, click "confirm" and the brake pump will be released, and the ring of motor will be heard for a few seconds, waiting for the page to jump and then click "confirm".

Step 10: Click “OK” button and exit the system. Turn off and then turn on the ignition switch and press EPB button. Completed.

Note:

For EPB Reset usually need release the handbrake.

http://www.obdii365.com/

2018/08/15

EUCLEIA Tabscan Reset EPB on Audi A8 2011

Vehicle Model: Audi A8 year 2011 3.0 TFSI quattro

Repairing request : After replacing the brake pad, need reset the rear branch pump of brake

1.connect EUCLEIA TabScan S7W or Tabsan S8 diagnostic scanner with car ,select ”Service” - “EPB Reset”

2.Select “Audi” –“A8”

3.Select “A8(D3)”

4.Select “Replacement of brake pads”

5.according to notes to release handbrake, then click “Yes”, at this time the rear brake pump motor will be heard for a few seconds to be retracted. After the retraction is completed, install the new brake pad according to the notification, then click “ok”.

6.at this time rear brake pump will ring for few seconds, after the branch pump is released , click ok.

7.all operation completed, exit tabscan system, press electrical handbrake button to make handbrake work, reset EPB completed.

Notes:

Please do remember release the handbrake once reset EPB.

http://www.obdii365.com

Eucleia TabScan Reset EPB Renault Koleos 2010

After exchanging the rear brake pad, need to reset EPB.

1.Put into P gear, press EPB,and release hand brake.

2.Connect with Eucleia tabscan S7W/ tabscan S8 diagnostic scanner and select “Service”-“EPB Reset”

3.Select “RENAULT”- ”Koleos“;

4.Select “Perform”.

5.Confirm tips and Select “OK”.

6.This time can hear the branch pump of rear brake pad is ting for seconds, then show “success”. click OK.

7.Install the new brake pad and click “Release”.

8. This time can hear the branch pump of rear brake pad is ting for seconds, then show “success”. click OK.

9.Operation completed. Exit software and press EPB button to make hand park working .

http://www.obdii365.com/

EUCLEIA TabScan S7W vs. TabScan S8 Dual Mode Scanner

EUCLEIA Dual-mode diagnostic and coding scanners comparison:

Tabscan S7C vs. Tabscan S7W vs. Tabscan S8 vs. Tabscan S8 Pro

Model	Tabscan S7C	Tabscan S7W	Tabscan S8	Tabscan S8 Pro
Image
Touch screen	7″ 1024X600LCD Capacitive	7″ 1024X600LCD Capacitive	8″ 1280X800 IPS Super TFT	8″ 1280X800 IPS Super TFT
CPU	1.3GHz ARM Cortex-A7	1.3GHz ARM Cortex-A7	1.8GHz ARM Cortex-A7	1.8GHz ARM Cortex-A7
O/S	Android 4.4.4 +EUUl 2.11	Android 4.4.4 +EUUl 2.11	Android 6.0.1 + EUUl 3.0	Android 6.0.1 + EUUl 3.0
RAM	2GB	2GB	4GB	4GB
ROM	16GB	16GB	32GB on-board memory	32GB on-board memory
Battery Capacity	3800mAh Lithium-polymer	7600mAh Lithium-polymer	7600mAh Lithium-polymer	7600mAh Lithium-polymer
Camera (Rear)			8.0 Megapixel AF with Flashlight	8.0 Megapixel AF with Flashlight
Connectors		7	7	7
Oilscope			Optional	Optional
WiFi	(802.11 b/g/n) 2.48.5GHz	(802.11 b/g/n) 2.48.5GHz	(802.11 a/b/g/n) 2.48.5GHz	(802.11 a/b/g/n) 2.48.5GHz
VCI Connectivity	OBDII cable/USB 2.0/WLAN	BT/USB 2.0/WLAN	BT/USB 2.0/ WLAN/ RJ45/HDMI/Type-C	BT/USB 2.0/ WLAN/ RJ45/HDMI/Type-C
Wireless VCI	Yes	wiScan T6	wiScan T6	wiScan T6 Pro
Full-system diagnosis	Yes	Yes	Yes	Yes
Datastream	Yes	Yes	Yes	Yes
Action Test	13	Yes	Yes	Yes
Service Functions	Yes	13	21	21
Coding		Yes	Yes	Yes
Programming		Yes	Yes	Yes
DoIP				Yes
wiScan APP (EOBD+ Maintenance)	Yes	Yes	Yes	Yes
Live Voltage	Yes	Yes	Yes	Yes
Live Connection	Yes	Yes	Yes	Yes
Auto VIN	Yes	Yes	Yes	Yes
One-key Update	Yes	Yes	Yes	Yes
Function Windows Switch	Yes	Yes	Yes	Yes
Remote Assistance		Yes	Yes	Yes

http://blog.obdii365.com/2018/08/15/eucleia-tabscan-s7-vs-tabscan-s8-dual-mode-diagnostic-scanner/